August 10, 2017

Centrifugal Fans

Centrifugal Fans
Our free-wheeling centrifugal fans use the same principle as the centrifugal fans, but, as they do not have a housing, they can cover additional applications. They have a low exhaust velocity which results in an even, low-loss flow. They require less space and are easier to access for cleaning purposes. – Explosion-protected fans are executed and certified in accordance with directive 94/9/EC ATEX and, in the future, 2014/34/EU.
We will be glad to assist you:
+91-20-27690606
+91-27692980
Fax : +91 – 20 – 27690325
response@engi-con.com
» Contact form
Centrifugal fans
MB Version (direct drive)
Volume flow480,000 m³/h
Pressure 6,000 Pa
Temperature 350 °C
Output315 kW
Miscellaneous Special material stainless steel, ATEX Zone 1 (21) and 2 (22), gas-tight, acid resistant, impeller covered or open, backward curved or radial tip impeller, impeller wear protection (tungsten carbide), impeller corrosion protection (Halar, Ruby Red)
Coupling
Volume flow1,000,000 m³/h
Pressure 50,000 Pa
Temperature 900 °C
Output3000 kW
Miscellaneous Special material stainless steel, ATEX Zone 1 (21) and 2 (22), gas-tight, pressure-resistant, acid resistant, impeller covered or open, backward curved or radial tip impeller, impeller wear protection (tungsten carbide), impeller corrosion protection (Halar, Ruby Red)
Belts
Volume flow750.000 m³/h
Pressure 6.000 Pa
Temperature 900 °C
Output600 kW
Miscellaneous Special material stainless steel, ATEX Zone 1 (21) and 2 (22), gas-tight, pressure-resistant, acid resistant, impeller covered or open, backward curved or radial tip impeller, impeller wear protection (tungsten carbide), impeller corrosion protection (Halar, Ruby Red)
Titanium Fans
Volume flow75.000 m³/h
Pressure 30.000 Pa
Temperature 110 °C
Output800 kW
Miscellaneous Impeller in titanium, grade 2 and grade 7, rubberised housing, 4-layer carbon labyrinth seal with sealing gas, water injection intake manifolds and impeller, titanium or soft rubber impact protection
Double inlet
Volume flow2.000.000 m³/h
Pressure 6.000 Pa
Temperature 400 °C
Output3.000 kW
Miscellaneous Wear protection (tungsten carbide), with inlet boxes or free air intake
Eco line
Volume flow160.000 m³/h
Pressure 6.000 Pa
Temperature 250 °C
Output132 kW
Miscellaneous Shorter delivery times due to stock inventory, high efficiency at attractive prices, available in three housing positions